The TM-TELE Techmount is a universal projector ceiling bracket which secures data projectors safety and sturdily to ceilings. The telescopic design allows fast adjustment without the need cut and drill the pole. It has a greater range than most other telescopic mounts and the pole can be removed for 'flush-mounting' the projector as close to the ceiling as possible. Note unlike the TM-1200 this bracket cannot be extended. Thoughtful design touches include a length adjustment locking-off system which requires only one hand. A tilting mechanism is included which tilts to a full 90 degrees, allowing you to use the bracket as a boom if need be. In line with best-practise a safety fall-arrest tether is included which secures the projector to your bracket. Independent testing on calibrated test equipment measured a breaking-strain of half a ton! We recommend a maximum safe working load of 10kg which is well within the limits of the product. Fitting the bracket to the projector is simple; most projectors have threaded inserts in the bottom for attachment. Not all use the same diameter screws we provide a selection to suit almost all projectors. Simply adjust the arms on our bracket over the attachment holes, and insert a screw into the projector. Rather than having a bolt that runs through the pipe and blocks cable access, Vision's unique quad-bolt 'chute-through' system which leaves cable access clear - even for a big VGA connector. A spanner and pin-hex key are included. Vision also includes a hex-key bit for a power drill to speed up installation. Quick-release mechanisms make life easier for thieves, so the TM-TELE is secure and features security bolts.
- Universal projector ceiling mount with telescopic pole
- Overall length 440-735 mm
- Full adjustment: tilt at top for sloping ceilings / pitch and roll at the bottom