Best Sellers

Tripp Lite SmartPro 1U 120V 1kVA/800W Line-Interactive Sine Wave DB9 6-Outlet USB Uninterruptible Power Supply with Pre-Installed SNMP Card (Black)

£847.43 with Free Delivery
Debit Card Discounted Price: £845.73

Similar Products

Product Part Numbers

  • Quick Find Code: K676262
  • Manufacturers SKU: SMART1000RM1UN
  • Product UPC/EAN: 037332190741

Product Description

The SMART1000RM1UN SmartPro 120V 1kVA 800W Line-Interactive Sine Wave UPS provides battery backup and AC power protection against blackouts, brownouts, power surges and line noise that can damage electronics or destroy data. Ideal for backing up data centers, VoIP systems and network closets, the SMART1000RM1UN switches to 1kVA/800W battery mode in milliseconds to keep your connected equipment running long enough to save files and shut down safely with no data loss. Two of the six NEMA 5-15R outlets may be switched off remotely to reboot equipment or shed nonessential loads to maximize battery backup time for mission-critical equipment. The internal battery provides 14 minutes of support at half load (400W) and four minutes at full load (800W). The Tripp Lite SNMPWEBCARD accessory card comes pre-installed to permit remote management of the UPS, including reboots, configuration, updates and activity logs. Automatic voltage regulation (AVR) maintains 120V nominal output over an input range of 83V to 147V without using battery power. EMI/RFI noise filtering improves your equipment's performance and prevents damage. A 450-joule surge suppression rating protects your equipment from harmful power surges. With Tripp Lite's included PowerAlert software, the SMART1000RM1UN enables safe unattended system shutdown and file saves in case of a prolonged power failure. Front-panel LEDs monitor power, voltage correction, load level and battery charge state.

Main Features:

  • Corrects under- and overvoltages from 83V to 147V
  • 6 NEMA 5-15R outlets-2 switchable via network interface
  • Network power management and control capability
  • SNMPWEBCARD comes pre-installed
  • 14 min. runtime at half load; 4 min. at full load
  • Protects Mission-Critical Rack-Mounted Equipment
  • Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
  • Audible alarm signals loss of utility power, overload and low battery
  • 6 NEMA 5-15R outlets
  • 3.05 m (10-ft.) power cord with 120V NEMA 5-15P input
  • 450-joule surge suppression rating
  • Reliable Battery Backup
  • Supports half load up to 14 min. and full load up to 4 min
  • Internal batteries designed for hot-swap field replacement
  • Included SNMP/Web Capability
  • Pre-installed Tripp Lite SNMPWEBCARD permits remote management of UPS, including reboots, configuration, updates and activity logs
  • Switchable Outlets
  • 2 load banks, each with one outlet controllable remotely to reboot equipment or shed nonessential loads
  • Automatic Voltage Regulation (AVR)
  • Maintains 120V nominal output over input range of 83V-147V without using battery power
  • EMI/RFI Line Noise Filtering
  • Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance
  • LED Indicators; Front-panel LEDs signal power, voltage correction, load level and battery charge state
  • Communications Ports; USB and DB9 ports combine with included PowerAlert software to monitor operating conditions, monitor AC power, and enable safe unattended system shutdown and file saves in case of a prolonged power failure
  • EPO port supports emergency shutdown in large facilities
  • Versatile Installation Options; Hardware included for mounting in 1U of EIA-standard 19 in. 2- or 4-post rack
  • Optional 4POSTRAILKIT1U accessory available for extra support in 4-post installations
» Return to the top


INPUT Protection for data line Servers/Network Storage Devices/Telecom Hardware
Input Voltage Range 120V AC
Input Configuration Single Phase
Frequency Range (Input) 60Hz
OUTPUT Waveform Type Sinewave
Output Capacity 1kVA
Output Wattage 0.8kW to 0.8kW
Output Voltage 120V AC
Max Configurable Capacity 1kVA
Voltage Regulation `+/-5 (Battery Mode); -21%, +8% (Line Mode)%
Frequency Range (Output) 60Hz
System Efficiency > 99%
FILTERING Surge Energy 450 Joules
SOFTWARE Bundled Software PowerAlert - Free download from
DISPLAY/WARNINGS Control Panel 2 Switches control off/on power status and alarm-cancel/self-test operation
LED Indicators 5 LEDs (line power, battery power, overload, voltage regulation and battery low/replace status)
Number of LED Indicators 5
Display Screen No
BATTERY Typical backup time at half load 14 minutes
Typical backup at full load 4 minutes
Typical Recharge Time 4 Hours
Battery Type Hot-Swappable, User Replaceable
Battery Voltage (Total) 24V
Batteries 1 x 24V
INTERFACES/PORTS Input Connection type 1 x NEMA 5-15P
Output Connections 6 x NEMA 5-15R
Interface Port 1 x USB; 1 x DB9; 1 x EPO; 1 x Pre-Installed Network Card
USB Ports 1 x USB
Serial Ports 1 x RS-232
COMPLIANCE Safety Meets FCC Part 15 Category A (EMI); Tested to CSA (Canada); Tested to NOM (Mexico); Tested to UL1778 (USA)
ATTRIBUTES Compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applications; Network UPS Tools Compatible; Windows/Mac OSX
ENVIRONMENTAL Environmental Operating Temperature 0-40°C - Humidity 0-95%
Protection Rating NEMA 1
PHYSICAL Form Factor Standalone
Case Colour Black
In The Box SMART1000RM1UN SmartPro 120V 1kVA 800W Line-Interactive Sine Wave UPS, SNMPWEBCARD web management card, USB cable DB9 cable EPO cable PowerAlert software, Mounting hardware, Owner's manual
Dimensions 44.45cm (W) x 42.545cm (D) x 4.445cm (H) - Weight 14.515kg
» Return to the top

What Our Customers Say

» Return to the top

Customer Discussions

Talk about this product

» Return to the top

Special Deals

Featured Brands

   SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing, Forensics, and Vulnerability Assessment  MasterCard SecureCode Verified Merchant   Verified by VISA