Best Sellers

Allied Telesis Gigabit Ethernet media Converter, 1000T to 1000SX (SC)

£307.69 » £191.68 with Free Delivery
Debit Card Discounted Price: £191.29

13 in Stock

Product Part Numbers

  • Quick Find Code: K800805
  • Manufacturers SKU: AT-MC1004-60

Product Description

The AT-MC1004 Ethernet media converter is designed to extend the distance of your network by interconnecting LAN devices that are physically separated by large distances. These media converters have the functionality to connect any managed/unmanaged 1000Mbps (1Gbps) switch or hub using standard 1000T RJ-45 connections and convert the signal to a 1000SX port. For the AT-MC1004, the fiber optic port has a fixed multi-mode fiber 1000SX (SC) connector and a maximum operating distance of 550m. Although the provisioning of Gigabit Ethernet connections is becoming relatively inexpensive, thanks in part to the availability of lower-cost copper Gigabit network adapters, the distance limitations of copper cabling make fiber segments a necessity in most networks. Small, comparatively inexpensive copper to fiber Gigabit Ethernet media converters present a simple and very cost-effective way of connecting Gigabit Ethernet LANs over extended distances. Each small media converter is powered by an external power supply unit for use in standalone applications. Where multiple media converters are used, up to 12 standalone devices can be inserted into a low-cost AT-MCR12 rack-mount chassis, allowing all the converters to be powered by a single internal power supply. In critical applications, a second load sharing internal power supply can be installed into the rack-mount chassis.

Main Features:

  • System and port LEDs
  • Auto-sense MDI/MDIX
  • Full-duplex operation
  • Cost effective migration from Gigabit copper to Gigabit fiber
  • MissingLink and Smart MissingLink troubleshooting features
  • External AC power adaptor
  • Standalone, wall or rack-mountable into the AT-MCR12 chassis
  • Jumbo frames up to 10K
» Return to the top


INTERFACES/PORTS Convert From 1000-Base-T
Convert To 1000-Base-SX
COMPLIANCE Standards IEEE 802.3, IEEE 802.3u
Safety Conforms to all standards normally supported by Allied Telesis products including safety standards EN 60950 (TUV), UL 60950 (cULus), CE compliant, EN 60825
Immunity Conforms to EN 55024 immunity standard EMI/RFI FCC Class A, EN 55022 Class A, VCCI Class A, C-TICK
ELECTRICAL Voltage 100 to 240V AC
Current 0.5Amps
Power Supply External
ENVIRONMENTAL Environmental Operating Temperature 0 to 40°C - Humidity 5 to 95%
PHYSICAL Form Factor Network Media Converter
LED Status Indicators System LEDs: PWR: Green Indicates that the converter power is ON. OFF Indicates that the converter has no power signal. • Fiber Optic Port LEDs: LNK: Solid Green Indicates a valid link has been established between the port and the end-node. OFF Indicates that there is no link between the port and the end-node. ACT: Flashing Green Indicates that the port is transmitting and/or receiving data packets. OFF Indicates that there is no activity on the port. • Mode Push Button LEDs: ML Green MissingLink mode is enabled. OFF MissingLink mode is disabled. SML Green Smart MissingLink mode is enabled. OFF Smart MissingLink mode is disabled. LT Green Link Test mode is enabled. OFF Link Test mode is disabled.
Case Colour Grey
Pack Quantity 1
Dimensions 10.5cm (W) x 9.5cm (D) x 2.5cm (H) - Weight 0.27kg
» Return to the top

What Our Customers Say

» Return to the top

Similar Products

» Return to the top

Customer Discussions

Talk about this product

» Return to the top

Special Deals

Featured Brands

   SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing, Forensics, and Vulnerability Assessment  MasterCard SecureCode Verified Merchant   Verified by VISA