NOTE: SATA Drive Write Cache is disabled by default to minimize the risk of data loss in case of power loss. For information on how to enable Drive Write Cache on SATA drives via supported controllers and HBAs and what precautions should be followed please visit: www.hp.com/go/SATA • NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
- HP 1000GB (1 Terabyte) (7200rpm) Hot Plug Midline SATA Hard Drive
- Transfer Rate (Maximum) - 3Gb/s